Start of Page

Steriken STERILIZATION INDICATOR CARDS

Home > Sterilization Indicator

High performance sterilization integrating indicator is the highest quality with the most
advanced technology for the new generation. Color is gradually changing on the indicator cards indicating that sterilization has been completed. Usually the card can be used by separated on the center,therefore,twice more economical,and if without being separated,can cover the larger area for check in case of required.

STEAM-INDICATOR-CARD (Model : SL-4N)
Multicritical Process Variable indicator

Multicritical Process Variable indicator-indicator(Type-4) is performing for color-change in accordance with such three parameters as time, steam, and temperature covering 121ºC to 141ºC.

The distinguished Characteristic is separated to 4 cards by perforation line on one indicator as below catalogue. It enables to raise up the cost performance as widely being accepted worldwide including OEM.

Standard version is a laminated indicator without an adhesive backside,

upon request the possible variety : non laminated non adhesive backside (Model : SN-4N),

non laminated adhesive backside (Model : SN-4A),

laminated adhesive backside (Model : SL-4A),

Sample Steam indicator card (Model : S-C)

Request for catalogue.

Go to page top

STEAM-INDICATOR-CARD (Model : SL-6N)

Emulating-indicator (Type 6) is performing very precisely for color-change in accordance with such three parameters as time, steam, and temperature covering 121ºC15 min. 135ºC3.5 min. upto141ºC;. The color-change is from wine red to green, same as Model : S-C5, Model : S-C6 is changing.

Emulating-indicator(Class-6) enables to estimate aseptic guarantee level : by presuming the exposure condition of saturated vapor under measurement of precise color-difference. Model: SL-6N is Class-6 compliance statement by CIER (ISO standard test device). Delicate color-difference on plastic film laminated appears precisely as follows in accordance with all critical parameters.

The distinguished Characteristic is separated to 4 cards by perforation line on one indicator as below catalogue. It enables to raise up the cost performance as widely being accepted worldwide including OEM.

Standard version is a laminated indicator without an adhesive backside.

upon request the possible variety : non laminated non adhesive backside (Model : SN-6N),

non laminated adhesive backside (Model : SN-6A),

laminated adhesive backside (Model : SL-6A),

Sample STEAM-INDICATOR-CARD(Model : SL-6N)
Sample STEAM-INDICATOR-CARD(Model : SL-6N)

Required Performance : SL-6N

Color-difference can be recognized the following (1)(2).

(1) 134ºC 8.00 min. (SV = Stated Value)
(2) 133ºC 7.52 min. (-1ºC, -6% time against SV)

Request for catalogue.

Go to page top

STEAM-INDICATOR-CARD (Model : S-C5) Integrating indicator

Integrating-indicator(Type-5) is performing precisely for color-change in accordance with such three parameters as time, steam, and temperature covering 121ºC to 141ºC, separated to 2 cards by perforation line on one indicator as below catalogue. The color-change is from wine red to green. Standard version is non laminated indicator without adhesive backside.

Download for catalogue.

Go to page top

STEAM-INDICATOR-CARD (Model : S-C6) Emulating indicator

Emulating-indicator(Type-6) is performing precisely for color-change in accordance with such three parameters as time, steam, and temperature covering 121ºC15 min. 135ºC3.5 min. upto141ºC;. The color-change is from wine red to green, same as Model : SL-6N series.

Download for catalogue.

Go to page top

STEAM-INDICATOR-CARD (Model : SB-C6)

All these types are Black color change version Emulating-indicator(Class-6) for Model:S-C6, created by our original technology using Bismuth instead of Lead. Since we do not use any Lead at all for Black color, so environmentally friendly as well as nonhazardous material.

If you prefer the color change from ivory white to black Sample Color , instead of wine red to green as Model : S-C6, ready to supply this model including your own design in OEM basis.

Go to page top

STEAM-INDICATOR-CARD FOR PRION (Model : S-CP)

Emulating-indicator for Prion (Class 6) for color-change in accordance with the following parameters as time, steam, and temperature.Sample Color

  • SV : Temperature : 134ºC 18min.
  • Color changes from wine red to moss green gradually as model S-SC precisely up to 18min.
  • Steam sterilization after alkaline wash.

Go to page top

EO GAS-INDICATOR-CARD (Model : EO-C)

Sample EO Gas indictor card (Model : EO-C)

EO-C can be used for both of diluent EO Gas with carbon-dioxide gas and 100% EO gas
EO Gas : 500±50mg/L, Temperature 50±2ºC

Download for catalogue.

Go to page top

EO GAS-INDICATOR-CARD (MODEL : EO-RH)

Sample EO Gas indictor card (Model : EO-RH)

EO-RH can be used for both of diluent EO Gas with carbon-dioxide gas and 100% gas.
EO Gas : 575±25mg/L, Temperature : 55±2ºC

Integrating-indicator(Class-5)is developed to detect relative humidity which is hardly controlled in spite of very important parameter, besides such three parameters as time, EO Gas concentration, humidity. On the simultaneous use of EO-RH with EO-C, in the case of that although EO-C has properly changed, EO-RH has incompletely changed, then relative humidity is required to be checked. If both of EO-C, EO-RH color-change are incomplete, there is possibility to be not enough for some or all of EO-Gas sterilization parameters, therefore sterilizer should be checked again.

Go to page top

PLASMA MULTI-PARAMETER INDICATOR (Model : P-C)

Process indicator to check if sterilized under the following conditions, Color turns Purple to light peppermint Green after processed ; Sample Color

  1. Temperature : 40ºC
  2. Hydrogen peroxide vapor concentration : 30 mg/L
  3. Time : 15 min.
  4. H2O2 40g/M3
  • Relationship between above 2 and 3 is for example, if time is 7.5 min., then Hydrogen peroxide vapor concentration becomes 60 mg/L
  • All above conditions are certainly changeable, and adjustable to the requesting specifications.
  • Hazard identification ; Multi-parameter Plasma indicator contains no lead or heavy metal salts, and disposed of by incineration or any method used locally for the disposal of waste paper or similar material.
  • Storage ; stored in unopened or resealed packages in cool (0- 30ºC) dry (30 - 60% RH) conditions away from direct light.
  • Marking : Class 4 conforms to ISO 11140-1 : 1995 sterilization of health care products - Chemical indicators - Part 1 ; General requirements (Class 4)
    EN 867 ; 1997 Non-biological systems for use in sterilizers - Part 1 ; General requirements (Class D)
  • Ask us in case you need indicator only reacting for H2O2 Hydrogen peroxide solution.

Download for catalogue.

Go to page top

OZONE INDICATOR (Model : O3-C)

Process indicator to check if treated by Ozone, Color turns Brown to Yellow after processed. Sample Color

  • Standard Ozone CT Value 2,000.-ppm/min, also adjustable for required CT Value.
  • Storage ; stored in cool condition, away from direct light.

Download for catalogue.

Go to page top

INDEX FOR STERILIZATION TEST PRODUCTS

STEAM STERILIZATION

EO Gas STERILIZATION

PLASMA H2O2 STERILIZATON

OZONE STERILIZATON

Go to page top


End of Page